Home Page
Company Profile
Showroom
Box Making Machinery
Flexo Printing Machinery
Paper Printing & Book Binding Machinery
Paper, Paper Converting Machinery
SENIOR PRINT PACK MACHINERY CO.
 
3/5 Ply Automatic Corrugated Board Making Plant
To inquire, Select Product/s & Click on

Product Code : S-01

[Select]
Product Specification

Available Width: 1400mm,1500mm,1600mm,1800mm,2000mm,2500mm 

Single Facer [ Double profile ]

        Main Structure and Features

  • Individual drive box, separating dynamic oscillating, improves running stability.
  • Corrugating rolls Available with diameter  280mm,300mm and 320mm are made of EN 19.
  • Fine machined pressure roll with diameter  290mm,310mm,330mm and glue applicator roll (diameter  254mm) with optimum material.
  • Main bearings, lubricated with high-temperature grease.  Provide outstanding sealing performance and reliable lubricating.  Thin oil is optional.
  • a. The standard flute height

Sr.No

FLUTE TYPE

HEIGHT

FLUTE (30 CM)

PER METER

1

A (Broad)

4.2 to 4.6 mm

32 – 38

107 - 127

2

B (Narrow)

2.4 to 2.8 mm

50 - 56

167 – 187

3.

C

3.4 to 3.8 mm

38 - 44

127 – 147

 
 
Main Technical Data
  • Machine speed Available: 60mpm,80mpm,100mpm.

 


 

PRE-HEATER

        Main Structure and Features :

  • Double jacket preheating roll enhancing heat conduction efficiency.
  • Pre heater roll diameter :  400mm,600mm,800mm.
  • Manual wrap angle adjustment.

 

 
 

PRE-CONDITIONER

 

Main Structure and Features

  • Rotary preheating roll enhancing heat conduction efficiency.
  • A brake equipped for preheating roll enhancing heat conduction efficiency.
  • Manual wrap angle adjustment.
  • Pre-heater roll diameter : 400mm,600mm,800mm.
  • Wrap angle adjusting range : 600  ~ 1200

 

 
 

Overhead Bridge Conveyor

 

Main structure and Features

  • Frame made of channel iron, angle iron.
  • There is a single-faced web-elevating device with cotton belt equipped above each single facer.
  • Handrail and full covered reinforced footplates for safety protection.
  • Additional safe hand rail and stair.

Two sets of operation boxes with one at bridge and the other at glue machine.

 
 

Glue Machine

        Main structure and Features
  • Suitable for single-wall, double-wall line respectively.
  • The engagement and disengagement between pressure roll and applicator roll are mechanically controlled.
  • Individual drive unit is equipped for applicator roll when double facer provides drive source so as to prevent glue from drying out.  Self-power is optional.
  • Max. working speed : 60mpm,80mpm,100mp
  •  

 

Double Baker

 

 

  • Surface ground steel hot plates are of inner whirlpool structure, 175mm high and 550mm width.
  • Dense weight rolls of heating unit are manually and automatically lifted and lowered as a whole and also manually and automatically press the web in section independently of each other.
  • Dense weight rolls of cooling unit ensure perfect forming quality.
  • If configured with  cut-off, the drive unit must be driven with external power.

Main drive roll knurling with diameter 645mm , featuring smooth and stable belt conveying.

  • Imported Felt with excellent heat emitting, ventilation, moisture-proof, and age-resistance.
  • Manual felt run controller for both felts.  Automatic felt run controller is optional for the upper felt.
  • According to requirement, 10 hot plates for 3 Ply and 20 hot plates for 5 Ply can be configured in heating unit.
 
 

DRIVE ROLL STAND

        Main Structure and Features

  • Main drive rolls knurling 860mm for upper roll  645mm for lower roll) .
  • The big gear of drive roll employs bevel gear, reducing noise dramatically.

Slitter Scorer


Main Structure and Features

    • Motorized switchover between two rotary working stations.
    • Slitting tool and male-to-female scoring wheel.  Standard configuration
    • Slitting tool can be reground repeatedly, prolonging its life.
    • Axial adjustment for working station to meet web deviation.
    • Drive source is separate.
    • Point-to-flat scoring wheels are included (4sets)

       

    • Min. slitting space : 140mm.
    • Min. scoring space : 100mm.
    • Total power : 1.1kW (main drive is not included)

 

Cut-Off( Cnc Based)

Main Structure and Features

    • Two knife bars rotate to cut the board with shearing difference, featuring light impact and lower noise.
    • Precision adjustable anti-backlash gear ensures accurate mesh between knives.
    • Automatically synchronizing with the line.
    • Cutting precision is 2mm marked cutting can be realized.
    • Advanced man-machine interface and digital readout for production information display.

 

    • Cutting Length : 500-9999mm.
    • Cutting Precision : 1mm.
Other Products in 'Box Making Machinery' category
Oblique Type High Speed Corrugation Machine
Oblique Type High Speed Corrugation Machine
Four Bar Rotary Cutting & Creasing Machine
Four Bar Rotary Cutting & Creasing Machine
Hot Foil Die-cutting Machine
Hot Foil Die-cutting Machine
Eccentric Slotter Machine
Eccentric Slotter Machine
Single facer corrugation with online sheet cutter (PLC Control System)
Single facer corrugation with online sheet cutter (PLC Control System)
Duel flute corrugation machine
Duel flute corrugation machine
 
View all products(10)
 
<< Back
 
 
Contact Details
SENIOR PRINT PACK MACHINERY CO.
15-3-4 To 7, Prajay Mall Complex, Gowliguda Chaman, Hyderabad - 500012, Andhra Pradesh, India
Phone:91-40-32500198
Fax:91-40-24650389
Send Mail  
Contact Now
Key Personnel
Mr. Kawaljit Singh (Managing Partner)
Mobile:+919348016260, +919391046397



Copyright © 2009 by Senior Print-Pack Machinery Co. All Rights Reserved.